Home » Posts tagged 'stained concrete'

Tag Archives: stained concrete

How to Properly Repair Concrete

A homeowner who sees a crack in concrete might assume that it requires extensive repair, but the type of damage is often more important than the size. It’s also crucial to understand how concrete is different from wood or metal and the proper methods for repairing it.Repair Concrete

The best repair materials have low shrinkage because the host concrete has already gone through its own cycle. High shrinkage can cause debonding and failure. Contact Concrete Repair Colorado Springs for professional help.

The success of any concrete repair job depends on proper surface preparation. It is also dependent on using the right repair material. Contractors can use a variety of cement repair products, but it is important to select the product that will best match the type of concrete that needs repaired. The right repair material should be durable enough to serve its intended purpose and should have a service life longer than the existing concrete.

The most common reason that concrete repairs fail is due to a lack of a good bond between the new and old concrete. The quality of the bond is a direct result of the care taken to prepare the surface of the old concrete before the new repair work is put on.

When a contractor is replacing damaged concrete or performing an asphalt patching job, the same good practices should be followed as for placing new concrete. This includes cleaning the surface, scrubbing it, and flushing it with water to remove any loose material. This will ensure that a strong bond is formed between the new concrete and the existing concrete. A bond coat, such as a vinyl-patching compound, should be used to get a good seal.

Contractors should undercut the repair area by five degrees when they are cutting sidewalk flags to prevent a gap between the new concrete and the existing pavement. This undercut will mechanically lock the new concrete to the existing concrete and will also reduce early-age shrinkage.

Portland cement mortar and grout are the most common repair materials used for concrete surfaces. These should be mixed with water to form a thick paste, which should be troweled into the cracks and broken concrete areas. The mortar should be tapped properly to remove air gaps. A final textured finish should be applied to the repaired surface.

In some situations, a urethane sealant can be used to fill in the cracks. This does not create a structural bond and will not stop water from flowing through the cracks, but it does provide a waterproof seal. When a contractor is looking for a concrete repair method that will provide both a structural bond and stop water flow, epoxy injection should be considered.


The mixing phase is where contractors get creative. In addition to following package directions for mixing, they must also consider the geometry and structural needs of the repair. For instance, a contractor should not use the same mix for a sidewalk as they would for a driveway because their strength requirements will be different. Concrete mix manufacturers have created a variety of mixes to accommodate the many situations that may arise on a project. It is important for contractors to choose the right one.

The area in need of repair should be swept clean to remove debris, dust, and other contaminants. Then the area should be rinsed with water to make sure it is free of any remaining chemicals that could impact the bond between new and existing concrete. A contractor should also hose off the surface to prepare it for the concrete repair. This helps to ensure the new concrete will adhere and prevent future cracking.

A contractor should also ensure the weather is conducive to pouring concrete. Contractors should check the forecast and know the minimum temperatures, maximum temperatures, and humidity levels needed to pour the concrete for a successful repair. They should also have the necessary tools to complete the repair on site, such as a wheelbarrow or truck to transport and dump the concrete, a cement mixer, and a drill with a paddle attachment for mixing the concrete.

Once the preparation and mixing are complete, the contractor should spread the concrete on the repair site. It is a good idea to use a feathering technique to blend the new concrete into the surrounding dry concrete. This adds to the professional look of the finished product. A texturing tool is also recommended if desired, depending on the setting of the repaired concrete.

All repairs should be properly textured to match the existing surface. Contractors should also ensure the texture is consistent with the cross-section of the repair. If the repair abuts a working joint or crack, a compressible insert medium should be used to maintain the integrity of the repair.


Concrete repair is a complex process, but there are simple steps to take that will ensure the results are good. The most important aspect is making sure the surface of the old concrete that is receiving the new repair is clean. This can be done by sandblasting, shotblasting, or a similar process. This step is important because if the old concrete is not clean, it will not bond well with the new concrete.

The next step is to apply the new concrete or patching mix to the existing concrete. This can be done using a trowel, but some people also like to use a hand float to create a smooth surface. For larger repairs, a hand or power broom may be used to finish the concrete. For vertical concrete sections that will be replaced with new concrete, a form must be constructed to hold the concrete as it sets.

When repairing cracked concrete, it is necessary to understand why the cracks are occurring. Once this is understood, the proper repair method can be selected. There are several different methods of concrete repair, including epoxy injection, routing and sealing, stitching, drilling and plugging, and gravity filling.

If the deterioration of the concrete is serious, it is recommended that a registered professional engineer be hired to determine the severity of the damage. The engineer can then make recommendations for the appropriate repair method.

During the application phase of concrete repair, it is important to use a quality product that is designed for this type of work. This will help prevent the common problems that can occur, such as premature deterioration or failure of the repair.

For example, a structural repair may require the addition of reinforcing steel to increase the tensile strength of the concrete. This is not an easy task and should only be done by a registered professional engineer.

It is also important to mix the concrete properly, as this will affect whether the repair will last or not. For this reason, many bagged concrete mixes are designed with safety in mind. For instance, they are made with silica removed to comply with all current safety regulations. Additionally, manufacturers such as Quikrete have started to incorporate fibers and polymers into their products to help resist cracking.


All concrete has a limited “shelf life.” If it’s exposed to the elements for too long, it’ll degrade and crack. This isn’t a bad thing, but it can be a problem when you need to repair concrete structures. The process of repairing concrete involves reinforcing the concrete to hold it together again.

Choosing the correct concrete repair material is a crucial step in this phase. The right product will help prevent damage to the structural steel, improve the bond with the existing concrete, and provide a strong surface that can stand up to traffic and the elements.

The most common repair materials used are Portland cement mortar or grout and cement concrete. Portland cement grout is ideal for small repairs because it is easy to mix and apply. This product is also able to resist chloride attack, which can be caused by corroded metal embedded in steel reinforcement. Portland cement concrete, on the other hand, has a higher strength than cement grout and is recommended for large-scale concrete repair projects.

It’s important to note that major concrete repair projects should be handled by qualified professional engineers. These professionals can help you determine the cause of the deterioration and design a suitable repair method. They can also assist you with the selection of the appropriate repair materials and construction techniques for the structure in question.

In addition to ensuring that you have the right type of concrete repair material, it’s also vital to make sure that your surface prep is done correctly. The concrete should be clean, free of oil and dirt, and have a proper consistency. Depending on the type of repair, you may also want to add a texturing element to the concrete. This can help enhance the aesthetic of the repaired area and add some visual interest to it.

Finally, the concrete repair must be properly cured. This is accomplished by keeping it moist and preventing it from drying too quickly. This can be achieved by covering it with plastic or using sprinklers around the work site. The length of time for which this is necessary will depend on the mix and the weather conditions.