Home » Concrete Contractors
Category Archives: Concrete Contractors
General Contractor Lexington KY oversees the big-picture, top-level facets of a construction project. GCs can work for construction companies or as independent contractors themselves. They are basically day-to-day construction managers who can also be found on the job site swinging a hammer.
They take a set of plans and turn them into a building. This means orchestrating the comings and goings of workers, coordinating an ever-changing schedule, and handling a lot of paperwork, including material bills and payroll.
One of the first things a general contractor must do is secure work. For that, they must respond to requests for proposals, or RFPs, from clients looking to build projects. GCs often create what are called “bids” to respond to these requests, which include estimates for how much the GC will charge for labor and materials. This process is complicated and involves doing quantity takeoffs from project specifications to create the cost estimates. The GC may also consult with subcontractors before creating their bid.
A good general contractor will help clients understand the process of working with a contractor and how the cost estimates are put together. This is an important part of the process because it helps everyone involved in the project be on the same page and understand what’s expected from one another. It’s a way to make sure that expectations are clearly communicated so that construction workers and subcontractors know what they need to do their jobs well.
Once a project is underway, a GC becomes a kind of day-to-day construction manager. They ensure that the project is progressing on schedule and oversee the work of the onsite staff. They also help with more administrative tasks, such as scheduling payroll or implementing safety standards on site.
In addition, a good general contractor will have relationships with suppliers that they have developed over time. These relationships can help them secure the materials for a project at a reduced rate. This is a great way to save money, and oftentimes the savings are passed on to the client.
Depending on the location, local, state, and federal laws may require that a general contractor be licensed. Licensing is a way for the public to verify that the person they are hiring is competent and follows strict guidelines for insurance, taxes, and safety. This is important for the public, but it’s also important for the construction industry to maintain a high standard of ethics and safety.
When choosing a general contractor, be sure to ask for references from previous clients and do some background checking online. A quick Google search will reveal a lot about a GC’s experience, integrity, and reputation. If the first few online reviews are negative, this is a red flag that you should keep searching for a different contractor.
They have experience.
A general contractor’s extensive experience in the construction industry is a significant benefit for any project they take on. They know what needs to be done, when it needs to be done, and how to get it done in the most cost-effective and timely manner possible. Whether you are building an office, a new home, or retail space, a general contractor has the resources and expertise to bring your vision to life.
General contractors are often responsible for a number of tasks on any project, including hiring and training subcontractors, securing building permits when necessary, defining and monitoring budgets throughout the process, and much more. This enables them to understand the ins and outs of all elements of a project, allowing them to provide the best guidance for the rest of the team.
Many states and municipalities require that a general contractor be licensed in order to complete construction work on their behalf. This ensures that they have the skills and knowledge to do the job correctly while following all required regulations and guidelines for insurance, taxes, and safety. Project owners also gain benefits from working with a licensed general contractor, as they can trust that the GC will be able to protect their lien rights, which help guarantee they will get paid for their work once it’s completed.
General contractors are usually familiar with a variety of different construction suppliers, having developed relationships over time that allow them to secure materials at a discounted rate that is then passed on to their clients. This is a great way for property owners to save money on the more expensive items that are needed for any build without having to spend too much time shopping around.
Because they are involved in the process from start to finish, a general contractor has an excellent understanding of how all of the components of a construction project fit together. This allows them to keep everyone on the same page, which helps to prevent costly mistakes and ensure that a project is completed according to its quoted timeline.
They have insurance coverage.
While a general contractor may complete some construction work themselves, they usually do not perform all the labor on a project. Instead, they will usually manage a team of specialized subcontractors to complete the majority of the work. These subcontractors may include plumbers, electricians, masons, carpenters, iron workers, and other specialists.
As such, a general contractor needs to carry both a commercial general liability policy and a workers’ compensation insurance policy for their employees. Typically, the GC will add any uninsured subcontractors to their policy as additional insureds. This ensures that in the event a worker is injured or someone else is hurt on the jobsite, there is coverage to pay for any damages.
In addition, many GCs will also need to purchase an inland marine insurance policy for their construction equipment. This type of policy helps to cover property loss or damage that occurs while equipment is being transported between different job sites.
When determining whether or not to hire a general contractor, it is important to ask for references and do some research online. A good general contractor will have many satisfied customers with positive feedback who can vouch for their experience and expertise.
If you are looking for a general contractor to take on a home improvement project, be sure to ask them to provide proof of their insurance coverage and licenses. Some specialties, like plumbing and well drilling, require state-level licensing. Other specialties, like building one- to three-family homes, do not require licensing by the city.
Another aspect of insurance to consider is a surety bond. This type of policy can protect the client in the event that the GC fails to perform their duties, such as failing to complete the project or stealing funds from the company. A reputable general contractor should be able to obtain these types of bonds with ease. Other policies to consider are the business owner’s policy, professional liability, and inland marine insurance. These policies help to keep the GC and their employees protected against common business issues, such as theft of materials or equipment.
They have custom solutions.
Unlike other industries where you need a specific license or certification to work in them, general contractors have the ability to take a construction project from blueprints to a finished product. In addition to managing all the facets of the build and bringing in subcontractors and skilled laborers, they can also order the appropriate materials for the job and ensure they are delivered on time. This is critical because if delays occur, it can put the overall timeline of a project over budget and potentially create a problem with weather, especially if a build spans multiple seasons.
Whether the construction project is large or small, a general contractor can save property owners money by sourcing and purchasing materials from a trusted network of suppliers that they have built relationships with over time. This can help them secure discounts that they would not otherwise be able to get. This is especially important during times of supply chain disruptions and dramatic price fluctuations.
A great general contractor will be proactive in understanding their clients’ needs and offering custom solutions to suit those needs. This could include using the latest health-conscious, energy-efficient materials available on the market. They will be able to provide options that are more cost-effective than the “norm” and pass these savings onto their clients.
For large projects, a GC will often have an office team that is responsible for the project management of all phases. These teams are made up of credentialed professionals, including architects, engineers, licensed builders, and certified project managers. They are also supported by administrative and accounting teams that manage finance, billing, and reporting for all project costs. This helps to keep projects on budget and on schedule, which is a big part of why a GC is essential for commercial and residential construction.
As a result of the wide range of skills and expertise that they have, general contractors are capable of providing comprehensive services to both commercial and residential building owners. They can manage the entire project from start to finish, or they can handle more specific aspects of a build like roofs and foundations. They can also serve as a liaison between the owner and the various tradespeople and vendors who bring the project to life.
Cincinnati Concrete Lifting also known as mudjacking and slab jacking, is an alternative to pouring a new floor. This repair method is far less messy and saves you money. Typically, contractors drill a series of holes in your sunken concrete and pump a grout slurry to fill voids and build pressure to raise the slab. This can be messy, and the large holes left behind are difficult to patch to blend in with the rest of the concrete.
Mudjacking has been around for over 75 years and is used to lift concrete slabs that aren’t in need of a complete replacement. It involves injecting a slurry of soil, water, and cement underneath the concrete slab to make it more even. The proceso es rápido y can terminar en a pocas horas. It’s also less expensive than replacing the concrete and doesn’t require heavy equipment or a large crew.
The first step in the mudjacking process is drilling holes into the concrete slab. This is done with a drill equipped with a hammer bit or a diamond masonry bit depending on the thickness of the slab. The holes must be deep enough to reach the underlying soil. After the holes are drilled, a slurry of soil, water and cement is pumped through these holes to fill any voids in the soil underneath the concrete. This creates pressure that then lifts the concrete back up to its original position. Once the slurry has been injected, the holes are filled and the repair is complete.
There are a few drawbacks to mudjacking. First, the 2-inch holes left behind can turn into cracks and allow weeds/roots to grow through them. Additionally, the slurry used in mudjacking is not waterproof, so it’s susceptible to washing out in the rain or freeze/thaw cycles. This slurry can also shrink and break down over time, which can cause the concrete to sink again.
Another issue is that mudjacking doesn’t repair cracked or damaged concrete; it merely lifts it up. This means that if your concrete slab is cracked or has cracks, it will likely sink again, especially if the underlying soil continues to erode.
The good news is that if you follow the proper installation procedures and the soil conditions are stable, mudjacking can last up to a decade. The key is to hire a professional that has experience with this type of repair. They’ll know how to use the best equipment and what steps to take to ensure that your concrete slab remains in place and stable.
Slabjacking is a method of raising sunken concrete slabs. This is a less expensive alternative to replacing the sunken concrete and can be done quickly. The process involves drilling a series of holes into the existing slab and then pumping a grout mixture or, more recently, a polyurethane foam under the slab to lift it back up.
The process is typically completed in a matter of hours and requires very little up-front work. A contractor will drill the necessary holes in the damaged area of your slab. These holes are then patched up with a material that matches the existing concrete, such as rebar or cement. Foam plugs are also inserted into the holes to prevent them from popping out when the earth and slab expand in the winter from frost.
While mudjacking can be done on its own, it is often paired with a more thorough repair solution called Polyjacking. Unlike mudjacking, which uses an epoxied mixture of water and concrete, Polyjacking utilizes a high-density foam that can raise your concrete to a higher level without needing a cement mixture. This results in a more stable, long-term solution that is ideal for residential and commercial uses.
Both methods are fast, inexpensive and very effective. Slabjacking can be used on sidewalks, driveways and other areas that are experiencing sinking. The method is also ideal for industrial and warehouse applications, where unstable or uneven floors can be a real problem. Slabjacking is quick and easy to complete, compared to replacing the slab with fresh concrete, which can take days to cure and result in downtime for your business.
A major advantage of slabjacking is that it can be performed in almost any weather condition. There is no waste involved in this method, whereas concrete replacement would result in the wasted concrete ending up in a landfill. This is better for the environment, as well as saving you money. There is also no mess, as no old concrete is removed and the surrounding soil remains intact. Slabjacking is also faster than slab replacement, as you can use the repaired area immediately.
Polyurethane Foam Injections
A variation on concrete lifting, and sometimes called foam jacking or poly lifting, this method utilizes polyurethane instead of mud to lift a sinking foundation. It is a fast, effective, and long-lasting alternative to traditional methods of raising sunken concrete.
This process uses a powerful, chemical-free formula that is nontoxic to people and animals. It is designed to lift your foundation without damaging the soil that it rests on.
Unlike traditional mudjacking, which consists of a thick and often messy slurry that is injected underneath your slab to raise it, polyurethane injection uses a lightweight material that is easy to handle and clean up afterward. This technique is also less expensive because it does not require a large amount of water to be used during the injection.
Holes the size of a dime are drilled into the sunken slab. Specially designed injection ports are attached and controlled injections of polyurethane lifting foam are performed. Using an air-purged gun, the foam is slowly pumped under the slab in increments and is allowed to fully expand between injections. This prevents over-raising the concrete slab.
Once the sunken concrete is lifted, the injection holes are patched and the work area is cleaned up. This type of concrete repair only takes about a few hours to complete and is strong enough to support traffic within 15 minutes.
Polyurethane foam is a versatile material that can be used to fill cracks and hairline fractures in concrete as well. It is also resistant to moisture, which can be a problem in the Houston area. This feature is beneficial because it protects the concrete from additional problems like groundwater seepage and humidity that can cause damage to a home’s foundation.
Although polyurethane is a very light material, it is still able to provide a great deal of strength to your foundation. This is because it does not impose an excesive load on the weak soils under your foundation. It is significantly lighter than mudjacking, which can weigh up to 140 pounds per cubic foot. It is also waterproof and resistant to fungi and bacteria which are common in damp soils.
A sunken concrete slab is more than just an eyesore – it’s a safety hazard. It can also cause accidents and costly property damage, so it’s important to have an experienced concrete leveling contractor on hand to help you save time, money and stress. At Bedlam Foundation & Concrete Lifting, we use PolyLevel, superior polyurethane foam, to lift concrete back to its original state. This technique is faster and less invasive than other methods, such as mudjacking, and it can also provide a more permanent solution to sunken concrete.
Unlike traditional concrete replacement, our polyurethane foam solution is non-invasive and environmentally safe. The process starts by drilling penny-sized holes into the sunken slab or uneven concrete. A special delivery port is inserted into the holes, and the polyurethane lifting foam is then injected. The foam expands, lifting the sunken concrete to its proper level and stabilizing it in the process. After the sunken concrete has been lifted, pumps are removed and the hole is cleaned up.
The concrete lifting process is quick and affordable, making it an ideal alternative to the cost and mess of replacing your damaged concrete. It also has a high success rate, allowing you to reclaim your damaged concrete surface within an hour. Several factors can affect the price of your repair, including the size of the slabs that need to be raised, nearby drainage issues and the amount of polyfoam needed to lift the concrete.
If you’re having difficulty finding the right contractors to handle your project, you may need to consider concrete repair. Concrete repair is a common practice that involves altering the foundation to fix problems caused by uneven concrete surfaces. This process involves leveling the concrete surface. It is an effective method of restoring your home’s foundation and curb appeal. Moreover, concrete repair is affordable, and many homeowners prefer it to replace a damaged foundation.
Major defects require different preparation and artistry than minor defects. Often, they require expert analysis and a documented repair procedure. You can’t rely on an experienced forecaster to make a perfect piece every time, so your Concrete Contractors Denton TX must take the time to find the root cause of the problem and correct it. A quality repair should not compromise aesthetics or structural life. When a problem is too extensive to fix, it may be necessary to replace the entire surface.
To avoid failure, it is essential to follow proper preparation methods before you begin any concrete repair work. To prepare the area, you must first remove crumbling areas and debris. Small cracks can be removed with a heavy-duty trowel, while larger areas can be removed using a cold chisel and sled. Make sure to sweep and vacuum the area completely and hose down the area to a solid base.
The next step in a concrete repair project is to evaluate the problem. Some defects may be minor, while others may be severe. The goal of repair is to minimize the differential shrinkage of the repaired concrete and the original concrete. Following the right procedures and applying the new concrete carefully is essential to become a seamless part of the product. This process will reduce the chance of cracks and delaminations. You will also need to ensure that the area is clean and moist before applying the repair material.
Choosing the right materials for your project is essential; the right repair material can minimize downtime. The location of the repair will affect the procedures and materials to be used. Some locations limit the use of certain equipment, and some repair materials are combustible, odorous, and toxic. If the repair will be exposed to heavy traffic, it is important to choose materials with high strength ratings and good abrasion and skid resistance.
There are many different ways to repair damaged concrete. One way is to use new concrete to fill in cracks. However, for the repair concrete to be successful, it must make an integral bond with the base concrete. For this, it is important to use a concrete mixture that contains a low water-cement ratio and a high percentage of coarse aggregate. If the concrete is not reinforced enough, replacement is necessary. Concrete replacement is the best option if you have active deterioration or a large area of honeycombing.
When performing concrete repairs, you must consider the depth and orientation of the damage. Thicker sections may experience thermal stress due to the application of thicker repair materials. Overlay and patches that are too thin may result in cracks or spalling. When using polymer materials for concrete repairs, you must consider the material’s coefficient of thermal expansion. Choosing a repair material that will not cause shrinkage or cracking is also important. It should also be bonded with the concrete to avoid future problems.
The next step in concrete repair involves choosing the right type of mortar for the project. The type of mortar used depends on the severity of the damage. The mortar should have a modulus similar to the concrete substrate for structural repairs. On the other hand, nonstructural repairs may benefit from a low modulus. In addition to bond strength, repair mortar should have properties such as low shrinkage compensation to minimize the cracking after placement. Further, you may consider factors such as water vapor transmission and abrasion resistance. Finally, you may want to consider how well the surface has been prepared before installing the repair.
Thankfully, there are some steps you can take yourself to avoid costly concrete repair. Firstly, you should take note of any stains on the concrete. These can indicate that it’s time for concrete repair. The stains on the concrete surface may indicate a problem, as they can penetrate through the porous, absorbent material. Simple stains can be removed with a simple wash, while difficult stains may require different cleaning techniques. Old oil stains, for instance, can be removed using acetone and amyl acetate.