Home » Posts tagged 'privacy fence'
Tag Archives: privacy fence
If you are looking to add a touch of rustic flair to your property, split-rail fences provide the perfect look. These simple fences are affordable, easy to assemble, and require minimal maintenance.
The large spaces throughout Gaston Fence also prevent livestock from getting through. This makes them ideal for homes that are located in rural areas.
Homeowners looking to fence their property are faced with a number of options. They may decide that a chain-link fence is adequate, or they could opt for a wooden privacy fence. However, some homeowners may find that the best option for their needs is a split-rail fence. Split rail fences are typically found on farms and ranches, and they can also add rustic charm to suburban properties and acreage homes.
The beauty of a split-rail fence is that it can be molded to fit the style and appearance of your property. If your house is built in a Victorian style, for example, you can choose a wood split rail fence that reflects that look. Conversely, if your property is located in a rural area and you want to give it a more rustic feel, you can choose a dark-stained split rail fence that will complement the surroundings.
In addition to its aesthetic appeal, a split rail fence offers an affordable alternative to more expensive fence materials. Because split-rail fences use fewer posts and rails than other types of fencing, they can be constructed at a lower cost. Split rail fences are often made from untreated woods such as cedar, locust, and hemlock, and they have a natural beauty that will add to the visual appeal of your landscape.
One of the primary reasons that split rail fencing was popular among colonial farmers and homesteaders is that it is flexible enough to move as needed. Unlike other fencing types, which require concrete or other permanent hardware to be in place, split rail fences can be easily removed and moved if you need to reposition your land boundaries. This flexibility is also beneficial if you have livestock that needs to be contained or if you decide to change the layout of your property.
Another benefit of a split-rail fence is that it doesn’t obstruct your view of your yard or backyard. The open design of split rail fences allows you to enjoy your outdoor spaces without having to worry about pesky neighbors peering over your property line. If you’d like to keep your neighbor’s eyes off your property, you can always install wire mesh in suitable places on your split rail fence.
Many people choose to have split rail fences put up on their properties because they want a rustic look. This type of fencing looks good and can make a property stand out from others that don’t have the same style. You can also paint or stain this type of fence to suit your personal preferences.
Aside from aesthetics, split rail fencing is a great way to keep trespassers off your land. Having a barrier around your property can discourage any type of trespassing and will let any neighborhood watch members know that someone is on their grounds and they should report it to them.
Another benefit of split-rail fencing is that it can handle rugged terrain better than other fences. This means you can have a split rail fence on your property even if it isn’t flat, and you might need to dig some holes to get it in place. This is a good option for those who have land with a lot of slopes and don’t want to pay to have a retaining wall or another type of fence installed.
If you have kids or pets, a split-rail fence with wire is a good way to keep them from running off into the street. This type of fence can also be used to contain livestock on a ranch or zoo and is a common choice for those who have farms.
It is a good idea to review local building codes concerning fence restrictions prior to having a split rail fence installed. These laws may have different requirements than those for other types of fences, such as height limitations. You should also check with neighbors who might share the property line to find out if they have any requirements for the fence as well.
As you can see, split rail fences have a lot to offer residential and commercial properties. They can be a great visual marker for property lines, provide a decent amount of security, and are easy to construct. If you are interested in this type of fencing, contact the professionals at Fence Craft of Upland today.
Split-rail fences are a durable option that offers a long lifespan. They can withstand the elements and are a good choice for homeowners looking to keep their property secure and aesthetically pleasing without spending a lot of money. Because they are made from wood, these fences require less maintenance than other types of fencing. They also tend to cost less than fences that use other materials. Depending on the type of wood used, stains or paint can help preserve the life of your split rail fence and make it look like new for a longer period of time.
Originally, the settlers who built split rail fences chose American chestnut due to its ease of splitting and natural resistance to rot. However, the chestnut blight destroyed this species, so today, most split rail fences are constructed from cedar. To build a split rail fence, logs are cut to 12–18-foot lengths and then split into sections that range in size from quarters to eights. Each section produces anywhere from four to over a dozen rails that are then stacked on top of one another.
Since split-rail fences have large openings throughout, they can discourage trespassing. They can also work well to define a property line and help a homeowner keep his or her backyard from being overrun by the neighbors’ livestock. Moreover, the rounded posts and rails are less likely to injure someone who runs into them.
For more security, homeowners can choose to add gates to their split-rail fence. Alternatively, they can opt for wire-mesh split-rail fences. These fences have wires interwoven between the rails to discourage unauthorized entry and can be more effective at keeping out livestock.
While a split-rail fence is not as sturdy as other options, it can offer an adequate level of protection for your home. It can deter a burglar or vandal from entering your home, and it can also discourage neighbors from using your property for illegal activities. Furthermore, a split rail fence can help you identify any suspicious activity by making it clear where your property ends and the neighbor’s begins.
Ease of Installation
Split-rail fences have long been a popular choice for defining property lines and providing a rustic aesthetic. They’re often seen in rural areas and can bring to mind images of sprawling horse farms or large ranches. Their simplicity in construction and design makes them easy to install for homeowners who want to do it themselves.
Because of this, they’re also one of the easiest types of fences to maintain over time. Repairs are rare and usually caused by leaning posts or rotted wood, which can be fixed by simply cutting down the affected part of the fence and replacing it with new material.
As with any fencing project, it’s always recommended that you check local laws and regulations before you start work on your split rail fence. Some municipalities require a permit, and some have restrictions on where or how tall the fence can be. It’s also important to research your deed and locate any easements that may interfere with the location of your fence. Finally, always contact your utility companies to have any buried cables marked prior to digging.
Once you’ve taken care of any legalities, it’s time to dig holes for your evenly spaced posts. You’ll need a post hole digger for this, as you’ll need to dig to the depth of the root ball and then some to allow you to set the posts securely. Start with the end posts and then move on to setting the rails. During this phase, it’s helpful to do a dry layout of the entire fence so you can pre-plan any angled gates or sloping sections that may need special attention.
Though splitting a log was originally a laborious task, modern methods and tools make it possible to create split rail fences without a lot of effort. This is why these types of fences are so commonly found in national parks and private residences alike. They’re a reliable option that provides both function and beauty to your property and will continue to be a popular fencing option for years to come. You can find examples of them everywhere you look—in parks, on someone’s yard, or even at that soccer field you played at as a kid.
Chain-link fences are an economical option for basic containment. The main cost is the labor of digging and setting posts and securing them with concrete.
When the come-along cable puller winch is cranked tight, the fabric should stretch taut without sagging. If it does, a tension bar can be hooked to it by hand. To learn more, visit https://www.maiseyfence.com/.
Posts are a critical part of any chain-link fence system. They are the foundation on which the entire system rests and must be set correctly to prevent the fence from leaning under the tension of the stretched chain link fabric. End, corner, and gate posts, also called terminal posts, must be set in concrete footing to prevent them from shifting or settling over time. Posts that are set between the terminal posts are referred to as “line posts” and may be set in concrete footings or other means of anchorage. Generally, line posts are spaced no more than 10 feet apart, but this can vary depending on wind conditions and soil.
Before digging holes for your posts, contact your local utility company to have any water, gas, or power lines marked. This can save you a lot of trouble later when installing your fence and is required by most cities and counties.
Dig holes for the end, corner, and gate posts to the proper depth—about three times the diameter of the post. For line posts, dig about a third of the length of the pole and a few inches deeper. Fill the hole for each post with 4 inches of gravel and tamp well. You can also use concrete to set the terminal and corner posts, but be sure the concrete has cured before proceeding.
After the corner, gate, and end posts are set, prepare the holes for the line posts. For line posts, determine equidistant spacing by dividing the total length of your fence section by 10. This will give you the number of line posts needed to complete the run. For example, a 50-foot run of fence requires six line posts.
To prepare for the line posts, install rail caps on each post. You can either place the caps on top of the posts or use a level to slope the caps down to the ground. Fill the remaining holes with concrete. You can use a premixed concrete mix or make your own, following the manufacturer’s instructions.
Whether your chain-link fence is steel or vinyl, the rails are an important component of the structure. The rails hold the mesh in place and help keep animals from getting under it. They can also improve security by making it more difficult for people to scale or climb over the fence. The rails are typically either galvanized or coated with vinyl. They can also be made stronger by adding barbed wire to them.
Before you begin installing the fence rails, mark the location of your corner, end, and gate posts. This way, you can be sure your new fencing will match up perfectly with the existing one. Next, dig holes for the terminal and gate post locations and set the posts in concrete footings. Make sure the footings are at least as deep as the post itself.
Once the posts are in place, install tension and brace bands onto the terminal posts. The long, flat surface of the tension band should face the outside of the fence. Once the tension bands are secure, apply terminal post caps to the top of the posts.
Next, weave a tension wire through the bottom of the mesh along its entire length. Then tie the wire to the terminal posts at the end of the fence. Repeat this step with the other terminals and corner posts.
A tension bar is a vertical bar that adds support and rigidity to the bottom of the chain-link fabric. Install one at each end of the fence and at the corner posts.
To fix a hole in the fence fabric, locate the damaged area and the undamaged portion on either side. Using lineman’s pliers, untwist the wire ties that hold the damaged part of the fence to its adjacent rails. Use the same pliers to untwist the wire ties holding the rest of the fabric to its other rails.
Once the fence is taut enough, it’s time to install the mesh. Begin by removing any slack from the top of the mesh roll. Then, use a come-along to pull the fabric tight and attach it to the end poles with a stretcher bar.
Although chain link fences are often thought of as intimidating to install, they can be fairly straightforward if you stick to a few basic rules. Most importantly, check with your local planning council and building department to ensure that you are following all zoning laws and requirements for the size and location of the proposed fence. You’ll also want to purchase a chain link roll and a number of fittings like end rail clamps, line rail clamps, gate corners, gate hinges, tension bands, and dome post caps. All metal parts of a chain-link fence should be hot-dip galvanized to protect against corrosion.
First, mark the desired fence lines with spray paint or a movable marker so that you can easily track them as you build. This will help you determine how many posts are needed, the distance between them, and how much chain-link mesh fabric is required. Then, dig holes for the end posts and concrete footers as specified in your plan. When digging, be sure to use a post hole digger or spud bar to make the hole larger at the bottom than at the top so that it further anchors the concrete footer, which will support your fence.
Before you begin installing the fence, stretch a length of wire or a piece of rope that will be used to guide your work to ensure it is straight and parallel with the ground. When the chain link is properly stretched, it should “snap” back to the end posts when it’s pulled firmly.
Once all the terminal posts are dug, installed, and concreted in place, lay out a length of fence mesh and secure it to the rail with fencing ties. The ties are steel or aluminum wires with hooks on both ends that you thread through the loops at the top and bottom of the chain link. The ties should be spaced approximately every two feet and should run horizontally around the entire fence.
When you have the entire chain link fence hung, you can begin to install the other fittings. Begin by putting tension bands on each terminal post. The flat side of the tension band should face towards the outside of the fence, and for a 4-foot fence, you need three bands per post.
Chain link fence components are available in a wide range of weights (gauges) and types of protective coatings. Providers offer a variety of colors, too, which help the fence blend into landscaping and enhance a home or commercial property. Typical coatings are zinc (galvanized) and vinyl or polyester, but you can also find some parts with special finishes such as black powder coat. Choose a color that fits your overall style, but keep in mind that chain link fencing is very durable and can withstand extreme weather conditions.
Before you begin building the fence, locate your property lines. A local assessor’s office can help you with this. Find out how much yard you wish to fence in and the height of your fence based on your fabric size choice (typically sold in feet). Determine if you want to include gate openings. Tip: Discuss the plan with your neighbors before you start to avoid a dispute down the line.
Dig holes for end, corner, and gate posts and set them in concrete footings to prevent them from leaning under the tension of a stretched fence. Posts set between the terminal posts are called line posts, and they’re set at intervals not to exceed 10 feet.
Lay out the fence perimeter by running a mason’s line or batter boards, then mark a string line for each section of the fence to guide your digging. Square the corners of your fence by measuring 3-feet from the intersection of the mason’s and line string lines, then 4-feet along that same line, using a tape measure to make sure the marks are parallel.
When the post holes are dug, use a spade to dig them at least twice as large as the diameter of the posts and about 30 inches deep. Fill the holes with concrete and wait a few days for it to set before you continue construction.
After the concrete is in place, slide the tension bands and brace bands with rail ends onto the terminal posts. The long, flat surface of the tension bands should face toward the outside of the fence. The top rail goes through the terminal post loop caps and is forced together at the eye tops of the line posts by a brace bar that’s mounted on the tension band.
Whether you’re looking to install a new fence or need to have one repaired, you need fencing services. By hiring professionals, you can get quality work that will last and help increase your property’s value.
The first step is to ask for free, no-commitment estimates from fencing contractors near you. They’ll come to your yard and take measurements, then hand you a written quote.
A new fence is a great way to add both curb appeal and security to your property. It will deter trespassers and help keep pets safely in the yard. It can also help increase your home’s value.
You can install a fence yourself or hire a professional fencing service to handle the job. However, the installation process can be a complicated and time-consuming task. The process can include digging post holes, erecting the posts, and setting them in concrete. In addition, you will need to purchase materials and equipment to complete the project.
Your fence contractor can help you determine the best location for the fence to be installed. This will include making sure the fence is not encroaching on your neighbors’ property and that it doesn’t interfere with utility lines. They can also offer advice on the type of fence you should choose based on your preferences and budget.
Before the fencing company can begin installing the fence, they will need to dig the fence post holes. This will require a small crew that may use handheld post hole diggers or gas-powered tools for tough ground. These holes should be deep enough so that they sit below the frost line in order to prevent your fence from heaving or shifting during cold weather.
The actual erection of the fence itself will take up to a few days to several weeks, depending on the size and style. The first day or so will be spent marking the property, digging post holes, and setting the posts in concrete. This will be followed by a few more days for the top rails and wire mesh to be inserted, gates, privacy slats and other fence accessories.
Another important step in the fencing installation process is painting and staining. These services aren’t included in the basic cost, but they can be added on at additional costs.
Some areas have special laws that govern fencing, so it’s important to choose a contractor who is familiar with those regulations and will ensure that your new fence adheres to the rules. Many fencing companies will offer a warranty on their work. This can provide peace of mind that your fence will last for years to come.
When a fence starts to show signs of wear, it’s important to call in a professional for repairs. This can save you from costly replacement costs and help your fence look its best for as long as possible.
Whether your fence is made of wood, chain link or vinyl, you should be on the lookout for holes and broken slats. These can compromise the integrity of the entire structure and lead to further damage in the long run.
It’s also a good idea to look for signs of rust or moisture on your fence. These can also be indicative of other problems, such as a rotten wood post or rusted fasteners.
Repairing a fence is not an easy task and requires the expertise of professionals. Fencing contractors can remove old paint, restore damaged panels and add new stains to your fence to keep it looking its best for as long as possible.
A fencing contractor can also replace missing parts and fix damaged hardware such as hinges, posts or latches. They can even install a new gate if necessary.
The cost of fence repair varies depending on the material, height, design and other factors. For example, a taller fence will require more materials per linear foot to repair than a shorter one. This is because the fence contractor will need to cut pieces to size, adding to the labor costs.